Banggood

El artículo recibido, no se corresponde con la fotografía de lo comprado, no tiene antena, ni conector, ni electrónica, es solo una caja vacía.

Arrived not warped and in excellent condition. After further analysis, it looks like the holes on top and the thru holes on the enclosure are perfect for 2-56 thread, use some 2-56 bolts and your golden ! Wish the cover didnt have such sharp edges (in the modeling, it'd be nice if the cover looked more like the D-M-NINE module. ) Still fits snugly though !

è di buona fattura e si incastra molto bene, completo di due gusci fronte e retro e una serie di viti insomma colpeto ho aggiungi una centralina multiprotocollo e installato nella taranis x7

Had to file the inside corners a little bit in order to easily fit the 4-in-1 module, as I didn't want to force the module into it. Fits into the Turnigy 9X module bay without any issue, and the antenna can be swiveled left-, right- and upwards with reasonable degree of room.

A bit of a tight fit installing the actual module, but if you put one end in first, it drops right in. This doesn't come with screws but you can use the screws out of most eye glass repair kits to fasten it together

Excelente acabamento, muito resistente, encaixe bom no rádio, cabe corretamente a pcb do multiprotocolo, pelo valor deveria vir a antena mas igual recomendo, útil.

This fits my Taranis Plus perfectly! The only gripe is about the screws as mentioned before. I had some screws for the props on a Syma x11 and they fit "ok" in all 7 screw holes. Not perfect but good enough. I wish that screws were included or even if they were sold separately that would work. Overall super happy! It's a bit of a tight fit with 4 in 1 multiprotocol, but it fit in! Super happy!

Fits fine only downside is its missing screws in the set. Maybe change the cover to a snapping version so you don't need to search for screws.

This is a 3D printed part not moulded plastic and so the finish and appearance is not great. It does the job though. This is intended for the Frsky but can be used on Turnigy 9XR Pro with some tweaks. I use this STM32 4-in01 module: https://www.banggood.com/2_4G-CC2500-NRF24L01-A7105-CTRF6936-4-IN-1-Multi-protocol-STM32-TX-Module-With-Antenna-p-1153902.html?rmmds=search You need to remove all the screw posts inside the case so that the module board can be flushed as low as possible otherwise the

I use this case for my taranis and it fits perfect. The only thing is that as described it came with no screws. That was a bit tricky to find srews that fits.