Mini Schalter Energieversorgung 220V To 12V 20A 250W Für LED Streifen Licht
I ran 11A and the voltage only drops from 12.3V to 11.8V not bad. The voltage can be adjusted slightly from 11.4V to 12.7V, I do not dare to try beyond this range.
Good,cheap power supply for LED projects, fan is a little bit loud, but if you can place it somewhere where you can't hear it. it's not a problem. BTW it can operate without the fan no problem.
Marchandise reçue bien emballée et en bonne état conforme à la description et de très bonne qualité content de mon achat
alim 12v reglable ,avec 2 sortie ,pas encore testée
Блок рабочий, нагрузку держит.
Nice stable power sonsiderng its size . Perfect fit for vertical mount on my 3D printer . Made some 3D printable end covers for it which can be downloaded >>http://www.thingiverse.com/thing:1339390
I tested on a 10A load, it operated without a problem, I haven't run it for long to see how hot it gets.. Fan is really quiet, not a problem. I built a cover for the A/C side. It would be nice if it came with a cover for the terminals for safety reasons. (even if its going into another enclosure.
It's a power supply, it supplies power and seems to do it well enough. Not had any problems with using it as described. The fan isn't that quiet but it's a small fan and they tend to whine anyway so can't say that is a problem with the power supply because it works well and keeps the unit cool.
Shipping was fast! PSU tested to be functional for now, although it really looks like a repaired unit with ALL the screws not tightened, even inside! Really glad the output caps are 25V and not 16V!
I use the power supply for an Audio amplifier. No noise due to the supply is heard, so I like the power supply very much. The only negative thing is that the ventilator within the power supply is "always on". Although the fan is quite it is not silent.