Kundenbewertungen

Eine Bewertung schreiben
  • Alle Bewertungen (7502)
  • Bild (929)
  • Video (13)
  • Alle Sterne
    • Alle Sterne(7502)
    • 5 Sterne(7259)
    • 4 Sterne(185)
    • 3 Sterne(22)
    • 2 Sterne(14)
    • 1 Sterne(22)
Sortiere durch:
Zur Vorschau
  • Zur Vorschau
  • Am hilfreichsten
  • Die letzten
Bewertungen nur aus Ihrem Land (Germany)
|
Original zeigen

Ein Teil der Rezension wurde automatisch übersetzt.

  • 27/08/2014

    The cheapest way to get the Nano v.3. USB cable is the standard one. I had problems recognizing in W7-x64 but it works perfect after installing new driver (different of Ardudino Uno), Can download from http://robotstore.cz/obchod/arduino/dccduino-nano-v3-0-atmega328-ch340g-arduino-rozsirujici-deska/

    Kommentar (1)
    Original zeigen
  • 02/08/2019

    Works great. Used in project to run a OLED screen. You need to install CH340 drivers and select "old bootloader" in Arduino IDE in order for it to conect. Price unbeatable.

    Kommentar (1)
    Original zeigen
  • 12/02/2020

    Tolles Produkt Großartiges Produkt Tolle Erfahrung Tolle Erfahrung Dieses Produkt wird von dem alten Pot Lauder angetrieben Diese Produkte verwenden (alter Bootloader)

    Kommentar
    Original zeigen
  • 26/02/2018

    This is really nice board. Silkscreen is readable. Only complaint I have is that board has mini usb instead of micro usb connector, so you might need to get cable for it: http://bit.ly/2oj7ZeB You will have to solder pins yourself, if you’re not into it, there is board with pins already soldered: http://bit.ly/2oeN5gH

    Kommentar
    Original zeigen
  • 03/12/2017

    This is quite nice board. Silkscreen is nice and readable. Only complaint I have is that board has mini usb instead of micro usb connector, so you might need to get mini usb cable: https://goo.gl/MgE41a You will have to solder pins yourself, if you’re not into it, there is board with pins already soldered: https://goo.gl/PYEipY

    Kommentar
    Original zeigen
  • 23/11/2014

    Incredible price for this small device. But with the normal ftdi-drivers this nano wasn't recognized and installed properly (Win 7 64bit). With the following drivers the problems were fixed. Now the clone runs absolutely flawless like an original one. Drivers: http://www.winchiphead.com/download/CH341/CH341SER.ZIP

    Kommentar
    Original zeigen
  • 01/10/2018

    Nice little controller for HAM radio fox-hunting transmitter on 80-meters. Have built the transmitter board and the Arduino Nano is piggy backed upon it. Arduino takes care of the timing (transmitter on and off) and generates the Morse code to be transmitted. Five of these units are operational at this time, more to follow!

    Kommentar
    Original zeigen
  • 25/01/2021

    Wie es bereits der Fall ist, arbeiten alle Aduinos in einwandfreiem Zustand. Sie sind bereits programmiert und einsatzbereit. Bitte beachten Sie das Kabel zu verwenden, es gibt Kabel, die nicht gut funktionieren, es ist nicht von der Arduino. Verwenden Sie Nano "alten Bootloader".

    Kommentar
    Original zeigen
  • 07/08/2017

    This is quite nice board. I tested it on my mac, and it worked like a charm. Silkscreen is more readable than on some other nano boards I have. Only complaint I have is that board has mini usb instead of micro usb connector, which is far less common, so you might need to get mini usb cable: https://goo.gl/MgE41a. You will have to solder pins yourself, if you’re not into it, there is board with pins pre soldered: https://goo.gl/PYEipY

    Kommentar
    Original zeigen
  • 20/10/2019

    Operational only with old bootloader (in Arduino IDE)!

    Kommentar (1)
    Original zeigen
Show:

    Gesamt 0 Seiten

    Zur Seite gehen

    Sie interessieren sich vielleicht für:

    recommendation for you
    • US$7.28
    • US$9.31
    • US$10.34
    • US$10.34
    • US$27.71
    • US$11.49
    • US$13.79
    • US$29.99
    • US$26.44
    • US$18.94
    • US$8.08
    • US$10.34
    • US$18.58
    • US$21.31
    • US$6.43
    • US$11.49
    • US$84.99
    • US$27.59