Eine Bewertung schreiben
  • Alle Bewertungen (580)
  • Bild (46)
  • Video (1)
  • Alle Sterne
    • Alle Sterne(580)
    • 5 Sterne(538)
    • 4 Sterne(39)
    • 3 Sterne(2)
    • 2 Sterne(1)
    • 1 Sterne(0)
Sortiere durch:
Zur Vorschau
  • Zur Vorschau
  • Am hilfreichsten
  • Die letzten
Bewertungen nur aus Ihrem Land (Germany)
Original zeigen

Ein Teil der Rezension wurde automatisch übersetzt.

  • 10/12/2019

    LCD board is not the same level and its bent when installed on the Raspberry Pi board. So I had to put pieces of paper to achieve the right position. Since my Raspberry Pi is version 4, I had to modify and it works. The price is reasonable when bought under promotion. Also, after I installed the driver, the touchscreen pointer is reversed.

    Kommentar (1)
    Original zeigen
  • 12/10/2019

    First the package is in order, screen packed in bubble plastic and in a separate box. The screen is supplied with a stylus. However, the screen is not docked in the supplied housing. The screen lies therefore loose on top of the housing. Not really pretty. Another point is that there is no documentation at all. And no reference to which driver should be used. This is therefore a challenge to search the internet for driver. This is a serious disadvantage. I do not yet have the drivers and therefore have not been able to try the screen.

    Kommentar (2)
    Original zeigen
  • 20/01/2019

    The case for the Raspberry PI B+ form factor is versatile in its design. It s is made as 3 snap together sections that offer flexible outcomes. Because the back has places for screw heads, it could attach to a wall or similar face and the RBPI board attached to it later. The LCD included in this kit fits well when as an assembled (LCD RBPI) is placed on the back cover and next the border portion of the case snapped on top. The unit is compact and work well in the sample runs done with it. The included stylist worked acceptably well to navigate the RBPI via the LCD touch input. The third case piece if snapped on closes the RBPI board inside but the LCD would not have room to be simply attached at the same time. The case and LCD are versatile items for the RBPI. Also the LCD worked in the test of placing in on the RBPI-zero-W. The PI-zero is slower but can work with the image having the screen drivers.

    Original zeigen
  • 23/12/2020

    mit einem rpi 2b v1.1 15 fps mit 5v2A psu 22 fps mit9v 1.67a, das ist, was 700Hz tun können, aber es kam schnell und passen perfekt! tft funktioniert gut mit google code:) Sie brauchen nur upgrade sys und aktivieren spi;)

    Original zeigen
  • 19/01/2020

    Bildqualität nach Preis (normales LCD). Die Touchpanel-Kalibrierung ist klebrig. Früher hat schon jemand vorgeschlagen, die SwapAxis auf 0 zu setzen. Für mich war es die Lösung. Endlich ist das Display nutzbar, siehe beigefügte Bilder

    Original zeigen
  • 08/05/2019

    -The LCD looks nice, the viewing angles are very large except when viewed from the left side (the one with the SD card) -The case is well made, snaps shut and stays closed when handling, no need for the screws that were included in the package. -The sticky pad needs to be put in the corner opposite the LCD connector, to rest on the raspberry's ethernet connector. -When installing as described in the instructions, I had the touchscreen rotated (the display was horizontal/landscape but the mouse moved vertical/portrait). To fix this you have to run: sudo apt-get install xserver-xorg-input-evdev sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf sudo reboot You can see it in the picture running OctoPrint with the TouchUI plugin.

    Original zeigen
  • 25/11/2019

    I ordered this, because I needed an display for my Pi 4. Case was useless, but after I followed the instructions. I have an Raspberry Pi 4 with an 3.5 inch display. Touch screen works OK, but resolution is a bit larger. Will fix that in time. The goods came in a week/two so shipping was fast. Happy with my order.

    Original zeigen
  • 26/06/2019

    very good solution that i was looking for. fits well with 3.5 inch touch lcd

    Kommentar (1)
    Original zeigen
  • 28/10/2020

    Pünktlich erhalten die Packung, in gutem Zustand, aber ohne Gebrauchsanweisung. Ich hatte nach einer Möglichkeit gesucht, meinen PC auf einem drahtlosen Bildschirm (so wifi) zu überwachen. Mit diesem Bildschirm ist es mir gelungen, die Treiber problemlos zu installieren.

    Kommentar (1)
    Original zeigen
  • 17/02/2020

    Der Bildschirm funktioniert hervorragend. Die Berührung muss kalibriert werden - habe nicht bis zu diesem Punkt, aber es sieht so aus, als ob alles perfekt sein wird.

    Original zeigen

    Gesamt 0 Seiten

    Zur Seite gehen

    Sie interessieren sich vielleicht für:

    recommendation for you
    • US$24.24
    • US$29.99
    • US$26.24
    • US$42.99
    • US$19.64
    • US$6.89
    • US$12.99
    • US$24.24
    • US$8.51
    • US$26.99
    • US$63.51
    • US$6.92
    • US$11.61
    • US$4.59
    • US$18.99
    • US$6.92
    • US$11.19
    • US$12.69