Az év végi rendelési idő ellenére 10 napon belül megérkezett. Furcsa módon nem házhoz jött, hanem a közelben lévő csomagpontra. Kedvező ár, jó minőség.
The description mentions a jumper next to the header.. there are no pins there as you might reasonably expect from the wording. Needs jumpers or switches soldered to the board for program and reset functions, else it's just a USB-serial bridge. Others have detailed this n their reviews of the programmer alone. I bodged some jumpers on for the sake of testing, as shown in the photo. Works welll. Will probably get a better programmer if I continue with the 01s and use this board as a PSU/Serial interface,
This is great, if you want to flash the ESP01 that comes with it solder in a switch and press it while inserting to PC.
Gyors szállítás! Próba később...
I soldered two sma tactile switches to the usb-serial adapter, this way it becames a programming adapter for PlatforIO or Arduino. To start programming mode, push and hold the IO0 switch and push the RST switch.
you need a jumper to set the programing mode, works well, the ESP01 module came with it was able to program and use on my Pixracer
As described
parfait !
all complete arrived and it look like good
items packaged well.