FNIRSI FNB48P wird in einem hochwertigen Hochglanzkarton geliefert. Das Ganzmetallgehäuse des Geräts wirkt sehr langlebig. Der große 1,77"-Farbbildschirm ist TFT und hat eine Auflösung von 128x160. Es misst 77,5 x 40,4 x 14,1 mm und wiegt 37,7 g. An den 4 Seiten des Gerätes befinden sich insgesamt 6 Ports, eine Taste und ein Multifunktionsschalter. Es verfügt sogar über einen Schwerkraftsensor, der den Bildschirm dreht, wenn er gekippt oder geschwenkt wird. Der USB-Tester liefert genaue Messungen und funktioniert hervorragend mit allen Schnellladeprotokollen (bis zu 156W), die ich getestet habe. Hier ist ein kurzer Blick auf alle Hauptbildschirme 1-6:1) Grundlagenbildschirm (Spannung, Strom, Leistung), 2) Kapazität und Energie, 3) Äquivalentwiderstand, 4) Ladeprotokolle, 5) Spannungs-/Stromdiagramme, 6) Kabelwiderstandsmessung

FNIRSI FNB48P comes in a premium glossy carton case. The device's all-metal chassis seems very durable. The large 1.77" color screen is TFT and has 128x160 resolution. It measures 77.5 x 40.4 x 14.1 mm and weighs 37.7g. On the 4 sides of the device there are totally 6 ports, a button and a multi function switch. It even has a gravity sensor which rotates the screen when it is tilted or swivelled. The USB tester gives accurate measurements and works great with all fast charging protocols (up to 156W) I tested it. Here's a quick look to all main screens 1-6: 1) Basics screen (Voltage, Current, Power), 2) Capacity and Energy, 3) Equivalent Resistance, 4) Charging Protocols, 5) Voltage/Current Graphs, 6) Cable Resistance Measurement

FNIRSI FNB48P wird in einem hochwertigen Hochglanzkarton geliefert. Das Ganzmetallgehäuse des Geräts wirkt sehr langlebig. Der große 1,77"-Farbbildschirm ist TFT und hat eine Auflösung von 128x160. Es misst 77,5 x 40,4 x 14,1 mm und wiegt 37,7 g. An den 4 Seiten des Gerätes befinden sich insgesamt 6 Ports, eine Taste und ein Multifunktionsschalter. Es verfügt sogar über einen Schwerkraftsensor, der den Bildschirm dreht, wenn er gekippt oder geschwenkt wird. Der USB-Tester liefert genaue Messungen und funktioniert hervorragend mit allen Schnellladeprotokollen (bis zu 156W), die ich getestet habe. Hier ist ein kurzer Blick auf alle Hauptbildschirme 1-6:1) Grundlagenbildschirm (Spannung, Strom, Leistung), 2) Kapazität und Energie, 3) Äquivalentwiderstand, 4) Ladeprotokolle, 5) Spannungs-/Stromdiagramme, 6) Kabelwiderstandsmessung

This is a really handy unit to have. I already had a nice USB tester. However the ability to fully evaluate all the different modes on a PD or QC charger (not to mention a whole bunch of other protocols) is especially handy. Also good to be able to read the e-marker chips in higher wattage USB C cables. It will tell you exactly what the manufacturer claims the cable power capacity and USB version (e.g. speed) from the chip. It has the look and feel of a quality product, along with quality packaging and well thought out user interface for such a simple thing. Pretty easy to figure out. My pictures show tests of a charger, resistance readings from a couple of cables, as well as a cable chip readouts. All cables tested so far haven't had a manufacturer listed. Not sure if that is because they are off brand cables not from major manufacturers that do not include an ID.. The manual is pretty good. The one thing it could really use is a menu tree for reference. I plan on creating one. Not sure if I will be able to add that to the pictures later. If so I will post it later. About the only tricky thing to learn is that for most of the PD tests you must power the unit from a 5 volts supply to the micro-USB (PC) connector so that the tester has power during interruption as the charger cyucles through the power changes requested by the test. I just tested the cables and charger from my last Banggood order. Moving forward I will test all future purchases.

This is a really handy unit to have. I already had a nice USB tester. However the ability to fully evaluate all the different modes on a PD or QC charger (not to mention a whole bunch of other protocols) is especially handy. Also good to be able to read the e-marker chips in higher wattage USB C cables. It will tell you exactly what the manufacturer claims the cable power capacity and USB version (e.g. speed) from the chip. It has the look and feel of a quality product, along with quality packaging and well thought out user interface for such a simple thing. Pretty easy to figure out. My pictures show tests of a charger, resistance readings from a couple of cables, as well as a cable chip readouts. All cables tested so far haven't had a manufacturer listed. Not sure if that is because they are off brand cables not from major manufacturers that do not include an ID.. The manual is pretty good. The one thing it could really use is a menu tree for reference. I plan on creating one. Not sure if I will be able to add that to the pictures later. If so I will post it later. About the only tricky thing to learn is that for most of the PD tests you must power the unit from a 5 volts supply to the micro-USB (PC) connector so that the tester has power during interruption as the charger cyucles through the power changes requested by the test. I just tested the cables and charger from my last Banggood order. Moving forward I will test all future purchases.

This is a really handy unit to have. I already had a nice USB tester. However the ability to fully evaluate all the different modes on a PD or QC charger (not to mention a whole bunch of other protocols) is especially handy. Also good to be able to read the e-marker chips in higher wattage USB C cables. It will tell you exactly what the manufacturer claims the cable power capacity and USB version (e.g. speed) from the chip. It has the look and feel of a quality product, along with quality packaging and well thought out user interface for such a simple thing. Pretty easy to figure out. My pictures show tests of a charger, resistance readings from a couple of cables, as well as a cable chip readouts. All cables tested so far haven't had a manufacturer listed. Not sure if that is because they are off brand cables not from major manufacturers that do not include an ID.. The manual is pretty good. The one thing it could really use is a menu tree for reference. I plan on creating one. Not sure if I will be able to add that to the pictures later. If so I will post it later. About the only tricky thing to learn is that for most of the PD tests you must power the unit from a 5 volts supply to the micro-USB (PC) connector so that the tester has power during interruption as the charger cyucles through the power changes requested by the test. I just tested the cables and charger from my last Banggood order. Moving forward I will test all future purchases.