Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.

Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.

Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.

nice epp lots of carbon, only thing where is the COG?

nice epp lots of carbon, only thing where is the COG?

nice epp lots of carbon, only thing where is the COG?

Große einfache Flügel sehr stabil zu montieren, wenn mit Akku 550 und 850 nicht brauchen, um für CG suchen und die Batterie, die ich verwenden fliegt sehr viel war mit dieser Batterie 550 und 850, nur darauf achten, nicht zu fliegen, wo viel Wind vibrieren oder flambar, tou zufrieden

otima asa fácil de montar muito estável ,se usar bateria 550 e 850 nao precizar procurar CG e a bateria que eu uso voa muito estave com esta bateria 550 e 850 , so toma cuitado pr a nao voar onde venta muito pode vibrar ou flambar ,tou satisfeitos

Große einfache Flügel sehr stabil zu montieren, wenn mit Akku 550 und 850 nicht brauchen, um für CG suchen und die Batterie, die ich verwenden fliegt sehr viel war mit dieser Batterie 550 und 850, nur darauf achten, nicht zu fliegen, wo viel Wind vibrieren oder flambar, tou zufrieden

Exelent Flugzeug für einen Anfänger. Build dauerte 10 Minuten. Scheint ziemlich robust. Gebrauchte ein micro esc, 12a esc, 2280kv racestar, 3 Klinge 4 Zoll prop, 800mah 2s und es fliegt gut schnell und langsam. aber ein wenig untermotorisiert. Trimed Flügel mit Messer zu reduzieren Luftwiderstand. Müssen eine Seite zu malen, um mit der Orientierung zu helfen

Exelent plane for a beginner. Build took 10 minutes. Seems pretty sturdy. Used a micro esc, 12a esc, 2280kv racestar, 3 blade 4 inch prop, 800mah 2s and it flies well fast and slow. but a little underpowered. Trimed wing with knife to reduce drag. Need to paint one side to help with orientation

Exelent Flugzeug für einen Anfänger. Build dauerte 10 Minuten. Scheint ziemlich robust. Gebrauchte ein micro esc, 12a esc, 2280kv racestar, 3 Klinge 4 Zoll prop, 800mah 2s und es fliegt gut schnell und langsam. aber ein wenig untermotorisiert. Trimed Flügel mit Messer zu reduzieren Luftwiderstand. Müssen eine Seite zu malen, um mit der Orientierung zu helfen

Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.

Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.

Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.

Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.

Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.

Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.

Perfekt Park Slow Flyer, sehr robust!

Perfekt park slow flyer, very robust!

Perfekt Park Slow Flyer, sehr robust!

Gute Verpackung. Einfache Kit, aber in Ordnung

Good packing. Simple kit but okay

Gute Verpackung. Einfache Kit, aber in Ordnung

https://www.youtube.com/watch?v=edviFjZatoE

https://www.youtube.com/watch?v=edviFjZatoE

https://www.youtube.com/watch?v=edviFjZatoE

Das ist Anfänger freundlich mit leichtem Gewicht

This is beginners friendly with light weight

Das ist Anfänger freundlich mit leichtem Gewicht