DC-DC-Step-Down-Netzteil Einstellbares Drucktastenmodul mit LCD-Display
Есть защита от переплюсовки. Очень яркий экран. Точность показаний на высоте.Рекомендую!
Нужная вещь. Запоминает напряжение при котором выключили. Можно повторно включать не выставляя напряжение по новой. Модуль по размеру оказался меньше чем я предполагал, но это даже удобнее.
This was a little smaller than I anticipated, but it has a bright screen that is easily readable. Simple hookup makes them easy to use. Within 0.03v of the displayed reading, according to my 2 multimeters. They adjust easily, the adjustment seems to be in 0.03v increments, but that isn't an issue for most needs.
DC-DC Step Down Stromversorgung Einstellbare Module mit LCD-Display einfach zu kalibrieren. Ausgangszustand: Gerät von der Stromversorgung getrennt - linke Taste drücken und Stromversorgung herstellen - wenn Display blinkt sollten 5,00 V (4,98-5,02 V) angezeigt werden. Wenn nicht: - mit linker oder rechter Taste 5,00 V einstellen - Gerät vom Strom trennen - Wieder Stromversorgung herstellen, es ist kalibriert - Vorgang wiederholen, bis 5,00 V anliegen Foto Modul mit Gehäuse und 12 V Versorgungsspannung.
tension réglable de 0 à 17v : dommage que çà ne fasse pas plus Intensité mesuré est indiquée Garde la derniere tension réglée en mémoire Appui court bouge de 1/20 v Appui long bouge de 1volt/sec
As I needed a dual bench supply (5-12V/1A, 2A max)with a voltage and current monitor (not to bother with a nest of multimeters) I've bough a pair of these units. They have fitted my purpose perfectly. The current and voltage readings when checked with a professional calibrated source meter falls within 5% (WC) accuracy. For the price ..... it's a miracle
I have 3 of these units in service and just ordered another 3. The first is stepping 12 Volts DC down to 5 Volts that provides power to a 4 port USB hub feeding 2 Arduino Mega 2650s in Electronic Wall art. The second is used to Step 12 Volts DC town to 3 Volts, replacing 2 "D" batteries in an outdoor spinner motor. The third steps 19 Volts down to 13.2 that provides power to a series of 12 volt relays controlling outdoor lighting and a waterfall pump. The third provides a constant current of 1 amp for 6 hours every night and remains cool to the touch.
Собран хорошо, флюс отмыт. заработало всё как надо. хорошая покупка
ótimo produto em bom estado mercadoria chegou em ótimo estado. mais rápido do que o esperado recomendo
Качество пайки хорошее. Внешний вид отличный. Дает большую погрешность. Непонятно, можно ли откалибровать стабилизатор.