Hi, I just received thoses Gemfab 3025BN for my tarot 130 fpv with Tarot MT1104-4000KV motors and at first, I must admitt I was really unhappy with them. The weight is 0.98 grams for one (versus 0.62 gramms for stock). Thoses propellers are also more wide : 5.24 mm instead of 4.13 mm for regular (3025 versus 3020 of course) Due to this extra wide, the 6 mm screws coming with the motos don't fit because they can not reach anymore the motor thread. M2 x 7mm screw are required for this setup ! As M2 x 7mm are not really common, I used M2 x 8mm with 1 mm spacers, ( 8mmm screw will touch and damage the copper of the motor). Then the total of each screw is now 0.34 grams instead of 0.20. As we need 4 propellers and 8 screws sets, the total additional weight for this propellers are (for the moment mm with 8mm screw - I already ordered M2 x 7mm h3ex screw on e b a y as do not find out here) is : 0.98 x 4 + 0.34 x 8 = 6.64 grs vs 0.62 x 4 + 0.20 x 8 = 4.08 grs 2.56 grams more ! Should be only with 1.6 grams more with M2 x 7mm (22 grams each) I also tested them in flight and I must admit now that except the screw issue, I pretty have more torque with those propellers... then more speed and sensitivity... Maybe mean more crashes :) These are 3025 (versus 3020 for stock tarot props). I recommend !

Hi, I just received thoses Gemfab 3025BN for my tarot 130 fpv with Tarot MT1104-4000KV motors and at first, I must admitt I was really unhappy with them. The weight is 0.98 grams for one (versus 0.62 gramms for stock). Thoses propellers are also more wide : 5.24 mm instead of 4.13 mm for regular (3025 versus 3020 of course) Due to this extra wide, the 6 mm screws coming with the motos don't fit because they can not reach anymore the motor thread. M2 x 7mm screw are required for this setup ! As M2 x 7mm are not really common, I used M2 x 8mm with 1 mm spacers, ( 8mmm screw will touch and damage the copper of the motor). Then the total of each screw is now 0.34 grams instead of 0.20. As we need 4 propellers and 8 screws sets, the total additional weight for this propellers are (for the moment mm with 8mm screw - I already ordered M2 x 7mm h3ex screw on e b a y as do not find out here) is : 0.98 x 4 + 0.34 x 8 = 6.64 grs vs 0.62 x 4 + 0.20 x 8 = 4.08 grs 2.56 grams more ! Should be only with 1.6 grams more with M2 x 7mm (22 grams each) I also tested them in flight and I must admit now that except the screw issue, I pretty have more torque with those propellers... then more speed and sensitivity... Maybe mean more crashes :) These are 3025 (versus 3020 for stock tarot props). I recommend !

Hi, I just received thoses Gemfab 3025BN for my tarot 130 fpv with Tarot MT1104-4000KV motors and at first, I must admitt I was really unhappy with them. The weight is 0.98 grams for one (versus 0.62 gramms for stock). Thoses propellers are also more wide : 5.24 mm instead of 4.13 mm for regular (3025 versus 3020 of course) Due to this extra wide, the 6 mm screws coming with the motos don't fit because they can not reach anymore the motor thread. M2 x 7mm screw are required for this setup ! As M2 x 7mm are not really common, I used M2 x 8mm with 1 mm spacers, ( 8mmm screw will touch and damage the copper of the motor). Then the total of each screw is now 0.34 grams instead of 0.20. As we need 4 propellers and 8 screws sets, the total additional weight for this propellers are (for the moment mm with 8mm screw - I already ordered M2 x 7mm h3ex screw on e b a y as do not find out here) is : 0.98 x 4 + 0.34 x 8 = 6.64 grs vs 0.62 x 4 + 0.20 x 8 = 4.08 grs 2.56 grams more ! Should be only with 1.6 grams more with M2 x 7mm (22 grams each) I also tested them in flight and I must admit now that except the screw issue, I pretty have more torque with those propellers... then more speed and sensitivity... Maybe mean more crashes :) These are 3025 (versus 3020 for stock tarot props). I recommend !

These are well-made propellers. They are balanced and stiff. Perhaps they are designed for multirotors other than my Tarot TL130H1, which has a set of 1104 4000KV motors. The holes for the motor shaft and the screws are too small, and a lot of effort is required to fit onto the 1104 4000KV motors. As the propeller is thicker, the stock screws barely screw into the motor. These 3025 propellers did not improve the throttle response of my TL130H1, but I suppose they will work better on other setups.

These are well-made propellers. They are balanced and stiff. Perhaps they are designed for multirotors other than my Tarot TL130H1, which has a set of 1104 4000KV motors. The holes for the motor shaft and the screws are too small, and a lot of effort is required to fit onto the 1104 4000KV motors. As the propeller is thicker, the stock screws barely screw into the motor. These 3025 propellers did not improve the throttle response of my TL130H1, but I suppose they will work better on other setups.

These are well-made propellers. They are balanced and stiff. Perhaps they are designed for multirotors other than my Tarot TL130H1, which has a set of 1104 4000KV motors. The holes for the motor shaft and the screws are too small, and a lot of effort is required to fit onto the 1104 4000KV motors. As the propeller is thicker, the stock screws barely screw into the motor. These 3025 propellers did not improve the throttle response of my TL130H1, but I suppose they will work better on other setups.

bom produto acabamento de primeira balanceadas sem rebarbas ótimo produto

bom produto acabamento de primeira balanceadas sem rebarbas ótimo produto

bom produto acabamento de primeira balanceadas sem rebarbas ótimo produto

It is very durable and stable propeller. Low consumption and long fly time! +30-60sec!

It is very durable and stable propeller. Low consumption and long fly time! +30-60sec!

It is very durable and stable propeller. Low consumption and long fly time! +30-60sec!

хорошие пропы использую на моторах 1103. на вале 1.5мм не держаться нужно использовать винты для крепления! почему не положить винты в комплекте?

хорошие пропы использую на моторах 1103. на вале 1.5мм не держаться нужно использовать винты для крепления! почему не положить винты в комплекте?

хорошие пропы использую на моторах 1103. на вале 1.5мм не держаться нужно использовать винты для крепления! почему не положить винты в комплекте?

너무 훌륭한 제품입니다. 배송이 문제였지만, BANGGOOD의 처래 방안에 대단히 만족합니다. 기존 3020프롭과 성능차이가 확실하게 납니다. 비싸지만 3025 이 제품으로 계속 사용할 것 같군요. 많은 구입 바랍니다. 감사합니다.

너무 훌륭한 제품입니다. 배송이 문제였지만, BANGGOOD의 처래 방안에 대단히 만족합니다. 기존 3020프롭과 성능차이가 확실하게 납니다. 비싸지만 3025 이 제품으로 계속 사용할 것 같군요. 많은 구입 바랍니다. 감사합니다.

너무 훌륭한 제품입니다. 배송이 문제였지만, BANGGOOD의 처래 방안에 대단히 만족합니다. 기존 3020프롭과 성능차이가 확실하게 납니다. 비싸지만 3025 이 제품으로 계속 사용할 것 같군요. 많은 구입 바랍니다. 감사합니다.

Fantastische Qualität Bi-Blade Requisiten für 3" Quads. Typischerweise geeignet für 11xx oder 12xx Motoren, die heiß laufen können Tri-Bladed Requisiten. Sehr langlebig und sehr glatt. Sie fliegen toll auf meinem HGLRC Parrot 132 mit 1106 Motoren und 3" Requisiten.

Fantastic quality bi-blade props for 3” quads. Typically suitable for 11xx, or 12xx motors that may get hot running tri-bladed props. Very durable, and very smooth. They fly great on my HGLRC Parrot 132 with 1106 motors and 3” props.

Fantastische Qualität Bi-Blade Requisiten für 3" Quads. Typischerweise geeignet für 11xx oder 12xx Motoren, die heiß laufen können Tri-Bladed Requisiten. Sehr langlebig und sehr glatt. Sie fliegen toll auf meinem HGLRC Parrot 132 mit 1106 Motoren und 3" Requisiten.

Perfekt für meinen Racercube f3

Parfaites pour mon racercube f3

Perfekt für meinen Racercube f3

Superbes hélices. Les meilleures pour des builds lights. Vitesse et précision. La prise au vent est également nettement moindre que des tripales type Avan ou autre. Pas chères en plus. Elles sont résistantes, ne cassent pas, se plient. Il suffit juste de les remettre bien et sa repart.

Superbes hélices. Les meilleures pour des builds lights. Vitesse et précision. La prise au vent est également nettement moindre que des tripales type Avan ou autre. Pas chères en plus. Elles sont résistantes, ne cassent pas, se plient. Il suffit juste de les remettre bien et sa repart.

Superbes hélices. Les meilleures pour des builds lights. Vitesse et précision. La prise au vent est également nettement moindre que des tripales type Avan ou autre. Pas chères en plus. Elles sont résistantes, ne cassent pas, se plient. Il suffit juste de les remettre bien et sa repart.

flexible and durable props for your tiny race-quad! can absolutly recommend this propeller. very good price although!

flexible and durable props for your tiny race-quad! can absolutly recommend this propeller. very good price although!

flexible and durable props for your tiny race-quad! can absolutly recommend this propeller. very good price although!